The AccuPyc HP features a 100 cm
3 sample capacity to determine the true volume and density of solids and powders at high pressures up to 500 psi.
The bundle includes both a Control and Analysis Module and can be operated in either a stand-alone configuration using the internal keypad on the control module, or controlled with a desktop computer. The Control module is cable connected to the analysis module permitting remote analysis if desired.
Precision: Reproducibility within +/- 0.04% nominal, full-scale cell chamber volume.
Accuracy: To within 0.1% of reading, plus 0.1% of sample capacity
Features: - Two separate modules, one for control with keypad the other for analysis. Modules are connected via provided cabling
- Sample chamber can accommodate samples up to 48mm in diameter and up to 60mm in length
- Guaranteed reproducibility to within 0.04% full scale volume
- Transducer zeroing, calibration and operation are controlled by internal computer
- Can be connected directly to analytical balance for transfer of sample mass without transcription error
- Programmable for automatic repeat measurements or for data acquisition under user-selected tolerances
- User-programmable number of purges prior to analysis
- ASCII output from serial port can be captured by computer and used as input to popular spreadsheet programs